This task will track the racking, setup, and OS installation of [[ https://netbox.wikimedia.org/dcim/devices/2140/ | an-test-coord1002 using spare system wmf5178 ]], allocated via T289784.
== Hostname / Racking / Installation Details ==
**Hostnames:** `an-test-coord1002.eqiad.wmnet`
**Racking Proposal:** The peer system (`an-test-coord1001`) is in eqiad row D (rack D3) - so therefore this host should be in a different row for resilience purposes.
**Networking/Subnet/VLAN/IP:** - 1Gbps - one network port connection required - Analytics VLAN required
**Partitioning/Raid:** software RAID1 - existing recipe for `an-test-coord100*` is `partman/custom/reuse-analytics-hadoop-test.cfg`
**OS Distro:** Buster
== Per host setup checklist ==
Each host should have its own setup checklist copied and pasted into the list below.
an-test-coord1002:
[] - relocate system from D6 into any other 1G rack in rows A,B,or C. This needs to be in a different row than an-test-coord1001 which is located in D3
[] - update netbox with new rack location
[] - bios/drac/serial setup/testing
[] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
[] - network port setup via netbox, run homer to commit
[] - firmware update (idrac, bios, network, raid controller)
[] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
[] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host
[] - host state in netbox set to staged
**Once the system(s) above have had all checkbox steps completed, this task can be resolved.**