Change Details

This task will track the #decommission of servers `wdqs1005.eqiad.wmnet` #### `wdqs1005.eqiad.wmnet` **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag #### `wdqs1003.eqiad.wmnet` **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag #### `wdqs1003.eqiad.wmnet` **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag

This task will track the #decommission of servers `wdqs1005.eqiad.wmnet` #### `wdqs1005.eqiad.wmnet` **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag

This task will track the #decommission of servers `wdqs1005.eqiad.wmnet` #### `wdqs1005.eqiad.wmnet` **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag #### `wdqs1003.eqiad.wmnet` **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag #### `wdqs1003.eqiad.wmnet` **Steps for service owner:** [x] - all system services confirmed offline from production use [x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place. (likely done by script) [x] - remove system from all lvs/pybal active configuration [x] - any service group puppet/hiera/dsh config removed [x] - remove site.pp, replace with role(spare::system) recommended to ensure services offline but not 100% required as long as the decom script is IMMEDIATELY run below. [x] - login to cumin host and run the decom cookbook: cookbook sre.hosts.decommission <host fqdn> -t <phab task>. This does: bootloader wipe, host power down, netbox update to decommissioning status, puppet node clean, puppet node deactivate, debmonitor removal, and run homer. [x] - remove all remaining puppet references and all host entries in the puppet repo [x] - reassign task from service owner to DC ops team member and site project (ops-sitename) depending on site of server **End service owner steps / Begin DC-Ops team steps:** [] - system disks removed (by onsite) [] - determine system age, under 5 years are reclaimed to spare, over 5 years are decommissioned. [] - IF DECOM: system unracked and decommissioned (by onsite), update netbox with result and set state to offline [] - IF DECOM: mgmt dns entries removed. [] - IF RECLAIM: set netbox state to 'inventory' and hostname to asset tag