This task will track the racking, setup, and OS installation of dumpsdata100[45]
== Hostname / Racking / Installation Details ==
**Hostnames:** dumpsdata100[45]
**Racking Proposal:** Each in its own rack, in separate racks from the other three dumpsdata hosts
**Networking/Subnet/VLAN/IP:** Internal vlan, 10G for one host and 1G (for now) for the other. If the 10G connected host fails we'll need to be able to switch to 10G on the other.
**Partitioning/Raid:** HW raid, 1 12-disk raid10 volume; two disks in raid 1 for the OS. Partman recipe should be dumpsdata100X.cfg for the initial install, and reset afterwards to dumpsdata100X-no-data-format.cfg once there is data on the arrays.
**OS Distro:** Buster
== Per host setup checklist ==
Each host should have its own setup checklist copied and pasted into the list below.
dumpsdata1004:
[] - receive in system on #procurement task T280149 & in coupa
[] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
[] - network port setup via netbox, run homer to commit
[] - firmware update (idrac, bios, network, raid controller)
[] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
[] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host
[] - host state in netbox set to staged
dumpsdata1005:
[] - receive in system on #procurement task T280149 & in coupa
[] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
[] - bios/drac/serial setup/testing
[] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
[] - network port setup via netbox, run homer to commit
[] - firmware update (idrac, bios, network, raid controller)
[] - operations/puppet update - this should include updates to install_server dhcp and netboot, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
[] - OS installation & initital puppet run via wmf-auto-reimage or wmf-auto-reimage-host
[] - host state in netbox set to staged
**Once the system(s) above have had all checkbox steps completed, this task can be resolved.**