Change Details

This task will track the racking, setup, and OS installation of backup1010, backup1011 == Hostname / Racking / Installation Details == **Hostnames:** backup1010, backup1011 (unless other backup hosts are purchased in-between) **Racking Proposal:** Anywhere, as redundant as possible with backup1002, backup1008 & backup1009, as well as among them 2 (different rows, or if not, different racks). **Networking Setup:** 1 10G. Vlan (Specify) AAAA records:Y (both ipv4 and ipv6 enabled) **Partitioning/Raid:** * First SSD - not part of a RAID * Second SSD - not part of the RAID. * All others (HDs): RAID6. * The os should end up seeing 3 disks, sda, sdb (of aprox 480 GB each) and sdc (of around 160 available TB). * The recipe after that is: partman/custom/backup-format.cfg == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. ==== backup1010: [x] - receive in system on #procurement task T325225 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run [[ https://wikitech.wikimedia.org/wiki/DNS/Netbox#Update_generated_records | cookbook sre.dns.netbox ]]. [x] - network port setup via netbox, run [[ https://wikitech.wikimedia.org/wiki/Homer#Running_Homer_from_cumin_hosts_%28recommended%29 | homer ]] from an active cumin host to commit [x] - bios/drac/serial setup/testing, see [[ https://wikitech.wikimedia.org/wiki/Server_Lifecycle#Requested_-%3E_Planned_additional_steps_&_Spare_-%3E_Planned | Lifecycle Steps ]] & [[ https://wikitech.wikimedia.org/wiki/SRE/Dc-operations/Platform-specific_documentation/Dell_Documentation#Automatic_setup | Automatic BIOS setup details ]] [x] - firmware update (idrac, bios, network, raid controller) [] - operations/puppet update - this should include updates to netboot.pp, and site.pp role::insetup::data_persistence [] - OS installation & initital puppet run via sre.hosts.reimage cookbook. ==== backup1011: [x] - receive in system on #procurement task T325225 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run [[ https://wikitech.wikimedia.org/wiki/DNS/Netbox#Update_generated_records | cookbook sre.dns.netbox ]]. [x] - network port setup via netbox, run [[ https://wikitech.wikimedia.org/wiki/Homer#Running_Homer_from_cumin_hosts_%28recommended%29 | homer ]] from an active cumin host to commit [x] - bios/drac/serial setup/testing, see [[ https://wikitech.wikimedia.org/wiki/Server_Lifecycle#Requested_-%3E_Planned_additional_steps_&_Spare_-%3E_Planned | Lifecycle Steps ]] & [[ https://wikitech.wikimedia.org/wiki/SRE/Dc-operations/Platform-specific_documentation/Dell_Documentation#Automatic_setup | Automatic BIOS setup details ]] [x] - firmware update (idrac, bios, network, raid controller) [] - operations/puppet update - this should include updates to netboot.pp, and site.pp role::insetup::data_persistence [] - OS installation & initital puppet run via sre.hosts.reimage cookbook.

This task will track the racking, setup, and OS installation of backup1010, backup1011 == Hostname / Racking / Installation Details == **Hostnames:** backup1010, backup1011 (unless other backup hosts are purchased in-between) **Racking Proposal:** Anywhere, as redundant as possible with backup1002, backup1008 & backup1009, as well as among them 2 (different rows, or if not, different racks). **Networking Setup:** 1 10G. Vlan (Specify) AAAA records:Y (both ipv4 and ipv6 enabled) **Partitioning/Raid:** * First SSD - not part of a RAID * Second SSD - not part of the RAID. * All others (HDs): RAID6. * The os should end up seeing 3 disks, sda, sdb (of aprox 480 GB each) and sdc (of around 160 available TB). * The recipe after that is: partman/custom/backup-format.cfg == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. ==== backup1010: [x] - receive in system on #procurement task T325225 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run [[ https://wikitech.wikimedia.org/wiki/DNS/Netbox#Update_generated_records | cookbook sre.dns.netbox ]]. [x] - network port setup via netbox, run [[ https://wikitech.wikimedia.org/wiki/Homer#Running_Homer_from_cumin_hosts_%28recommended%29 | homer ]] from an active cumin host to commit [x] - bios/drac/serial setup/testing, see [[ https://wikitech.wikimedia.org/wiki/Server_Lifecycle#Requested_-%3E_Planned_additional_steps_&_Spare_-%3E_Planned | Lifecycle Steps ]] & [[ https://wikitech.wikimedia.org/wiki/SRE/Dc-operations/Platform-specific_documentation/Dell_Documentation#Automatic_setup | Automatic BIOS setup details ]] [x] - firmware update (idrac, bios, network, raid controller) [x] - operations/puppet update - this should include updates to netboot.pp, and site.pp role::insetup::data_persistence [] - OS installation & initital puppet run via sre.hosts.reimage cookbook. ==== backup1011: [x] - receive in system on #procurement task T325225 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run [[ https://wikitech.wikimedia.org/wiki/DNS/Netbox#Update_generated_records | cookbook sre.dns.netbox ]]. [x] - network port setup via netbox, run [[ https://wikitech.wikimedia.org/wiki/Homer#Running_Homer_from_cumin_hosts_%28recommended%29 | homer ]] from an active cumin host to commit [x] - bios/drac/serial setup/testing, see [[ https://wikitech.wikimedia.org/wiki/Server_Lifecycle#Requested_-%3E_Planned_additional_steps_&_Spare_-%3E_Planned | Lifecycle Steps ]] & [[ https://wikitech.wikimedia.org/wiki/SRE/Dc-operations/Platform-specific_documentation/Dell_Documentation#Automatic_setup | Automatic BIOS setup details ]] [x] - firmware update (idrac, bios, network, raid controller) [x] - operations/puppet update - this should include updates to netboot.pp, and site.pp role::insetup::data_persistence [] - OS installation & initital puppet run via sre.hosts.reimage cookbook.

This task will track the racking, setup, and OS installation of backup1010, backup1011 == Hostname / Racking / Installation Details == **Hostnames:** backup1010, backup1011 (unless other backup hosts are purchased in-between) **Racking Proposal:** Anywhere, as redundant as possible with backup1002, backup1008 & backup1009, as well as among them 2 (different rows, or if not, different racks). **Networking Setup:** 1 10G. Vlan (Specify) AAAA records:Y (both ipv4 and ipv6 enabled) **Partitioning/Raid:** * First SSD - not part of a RAID * Second SSD - not part of the RAID. * All others (HDs): RAID6. * The os should end up seeing 3 disks, sda, sdb (of aprox 480 GB each) and sdc (of around 160 available TB). * The recipe after that is: partman/custom/backup-format.cfg == Per host setup checklist == Each host should have its own setup checklist copied and pasted into the list below. ==== backup1010: [x] - receive in system on #procurement task T325225 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run [[ https://wikitech.wikimedia.org/wiki/DNS/Netbox#Update_generated_records | cookbook sre.dns.netbox ]]. [x] - network port setup via netbox, run [[ https://wikitech.wikimedia.org/wiki/Homer#Running_Homer_from_cumin_hosts_%28recommended%29 | homer ]] from an active cumin host to commit [x] - bios/drac/serial setup/testing, see [[ https://wikitech.wikimedia.org/wiki/Server_Lifecycle#Requested_-%3E_Planned_additional_steps_&_Spare_-%3E_Planned | Lifecycle Steps ]] & [[ https://wikitech.wikimedia.org/wiki/SRE/Dc-operations/Platform-specific_documentation/Dell_Documentation#Automatic_setup | Automatic BIOS setup details ]] [x] - firmware update (idrac, bios, network, raid controller) [x] - operations/puppet update - this should include updates to netboot.pp, and site.pp role::insetup::data_persistence [] - OS installation & initital puppet run via sre.hosts.reimage cookbook. ==== backup1011: [x] - receive in system on #procurement task T325225 & in coupa [x] - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned) [x] - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run [[ https://wikitech.wikimedia.org/wiki/DNS/Netbox#Update_generated_records | cookbook sre.dns.netbox ]]. [x] - network port setup via netbox, run [[ https://wikitech.wikimedia.org/wiki/Homer#Running_Homer_from_cumin_hosts_%28recommended%29 | homer ]] from an active cumin host to commit [x] - bios/drac/serial setup/testing, see [[ https://wikitech.wikimedia.org/wiki/Server_Lifecycle#Requested_-%3E_Planned_additional_steps_&_Spare_-%3E_Planned | Lifecycle Steps ]] & [[ https://wikitech.wikimedia.org/wiki/SRE/Dc-operations/Platform-specific_documentation/Dell_Documentation#Automatic_setup | Automatic BIOS setup details ]] [x] - firmware update (idrac, bios, network, raid controller) [x] - operations/puppet update - this should include updates to netboot.pp, and site.pp role::insetup::data_persistence [] - OS installation & initital puppet run via sre.hosts.reimage cookbook.