This checklist is able to be copied and pasted into phabricator hardware request tasks for reclaiming systems to spare or decom.
[x] - all system services confirmed offline from production use
[x] - set all icinga checks to maint mode/disabled while reclaim/decommmission takes place.
[x] - remove system from all lvs/pybal active configuration
[x] - any service group puppet/hiera/dsh config removed
[x] - assign role::spare::system in site.pp
START NON-INTERRUPPTABLE STEPS
[x] - disable puppet on host
[x] - power down host
[x] - disable switch port
[x] - switch port assignment noted on this task (for later removal) asw-c-eqiad:ge-4/0/0
[] - remove all remaining puppet references (include role::spare)
[] - remove production dns entries
[] - puppet node clean, puppet node deactivate
END NON-INTERRUPPTABLE STEPS
[] - system disks wiped (by onsite)
[] - IF DECOM: system unracked and decommissioned (by onsite), update racktables with result
[] - IF DECOM: switch port configration removed from switch once system is unracked.
[] - IF DECOM: add system to decommission tracking google sheet
[] - IF DECOM: mgmt dns entries removed.
[] - IF RECLAIM: system added back to spares tracking (by onsite)