Page MenuHomePhabricator

hw move: GPU from stat1005 to stat1010
Closed, ResolvedPublicRequest

Description

Hello, as part of T336040: Bring stat1010 into service with GPU from stat1005 we would like to move the AMD CPU card from stat1005 to stat1008 please.

We have informed users that this will likely happen in the next couple of weeks, but we haven't given an exact date yet.

  • - Provide FQDN of system.
  • - If other than a hard drive issue, please depool the machine (and confirm that it’s been depooled) for us to work on it. If not, please provide time frame for us to take the machine down. We can take down the machine when convenient to you
  • - Put system into a failed state in Netbox. n/a
  • - Provide urgency of request, along with justification (redundancy, dependencies, etc) Not very urgent, but next couple of weeks would be good.
  • - Describe issue and/or attach hardware failure log. (Refer to https://wikitech.wikimedia.org/wiki/Dc-operations/Hardware_Troubleshooting_Runbook if you need help) n/a
  • - Assign correct project tag and appropriate owner (based on above). Also, please ensure the service owners of the host(s) are added as subscribers to provide any additional input.

Event Timeline

@BTullis would you like to do before or after sre summit?

@BTullis would you like to do before or after sre summit?

Ideally before, please. I think we can do it at very short notice to users.

@BTullis I will be available monday 10am (est) if that works for you

@BTullis I will be available monday 10am (est) if that works for you

Yes please, that's great. I'll notify the users and make sure that both stat1005 and stat1010 are shut down by 10 am est today for you.
When the switch is complete, you can feel free to boot these machines at any time. There are no special procedures to follow.

I'll follow up after that with any puppet work or anything else required to get the GPU working on bullseye.

The two servers have been shut down and are ready for the hardware swap.

Removed gpu from stat1005
found power plug has changed between 730xd to 740xd.

both servers powered on with no gpu.

opened ticket requesting cable ordered T359089

Installed Gpu into stat1010