This task will track the racking, setup, and OS installation of frdb1005, frdb1006
Hostname / Racking / Installation Details
Hostnames:- frdb1005, frdev1006
Racking Proposal:- eqiad frack
Networking/Subnet/VLAN/IP:- two 1GB connections per server, one to each switch- both go in frack-fundraising vlan- fr-tech-ops will update this task with IPs when equipment arrives
Partitioning/Raid:- both get hardware RAID10, single virtual disk
OS Distro:- fr-tech-ops will deal with OS imaging
Per host setup checklist
Each host should have its own setup checklist copied and pasted into the list below.
frdb1005:
- - receive in system on procurement task T297649 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - DNS wmnet and PTR records
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- primary NIC MAC is D0:8E:79:F1:A2:86
- ip address 10.64.40.100
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.
frdb1006:
- - receive in system on procurement task T297649 & in coupa
- - rack system with proposed racking plan (see above) & update netbox (include all system info plus location, state of planned)
- - add mgmt dns (asset tag and hostname) and production dns entries in netbox, run cookbook sre.dns.netbox.
- - network port setup via netbox, run homer from an active cumin host to commit
- - bios/drac/serial setup/testing, see Lifecycle Steps & Automatic BIOS setup details
- - firmware update (idrac, bios, network, raid controller)
- - operations/puppet update - this should include updates to netboot.pp, and site.pp role(insetup) or cp systems use role(insetup::nofirm).
- - DNS wmnet and PTR records
- primary NIC MAC is D0:8E:79:F1:A3:0E
- ip address 10.64.40.101
- - OS installation & initital puppet run via sre.hosts.reimage cookbook.